Maytag Pet Pro 7-cu ft Steam Cycle Vented Electric Dryer (Volcano Black) Lowes.com (2024)

FAQs

What is the most common problem with Maytag dryer? ›

If your Maytag dryer isn't doing its job and drying your clothes completely in a single cycle, you have a problem. The most common cause is a faulty dryer moisture sensor. Your moisture sensor is important because it sensors how much moisture is in the load and adjusts the drying cycle as needed.

Do You Have to Hook Up Water to a Steam Dryer? Many functions on your Maytag^® Steam Dryer will work without the dryer being hooked up to water, but cycles specific to steam dryers will not function as intended.

If a dryer is heating but still has long dry times, the likely cause is a vent issue or restricted airflow. The venting going from the dryer to the outside of the home must be cleaned every one to two years or as needed when dry performance has decreased.

Maytag Dryers: Lifespan

The average dryer has a lifespan of around 10 years, but Maytag believes and often proves that appliances can last much longer than that. With a policy of repairing when possible, to enjoy the longest amount of time with each dryer as possible, a Maytag dryer is built with easy repair in mind.

Whirlpool and Maytag are both trusted manufacturers that have high-quality washers and dryers. CNET ranked Whirlpool as the top most reliable manufacturer for washers and dryers. However, the individual customer reviews rank Maytag higher than Whirlpool. Still, both brands experience occasional manufacturing defects.

The rebranded Maytag models, later termed Amanatags by dissatisfied owners, received poor customer reviews after reports surfaced of major mechanical and/or durability problems. The company also consolidated warehouse operations and cut the number of Maytag vendors.

Some Benefits of a Steam Dryer

As the steam cycle's steam penetrates clothing to remove wrinkles, it can also eliminate odor-causing bacteria. This enables you to simply freshen without having to wash. Regular dryers don't remove odors, so you always have to wash the item. Steam drying can make fabric feel softer, too.

Does a steam dryer need its own hookup? You shouldn't need additional plumbing for a steam dryer. You can connect your steam dryer to a water source by using a “Y” hose connector. The “Y” connector lets both your washer and dryer connect to the same water source – no extra pipes are needed.

There is no drain hose, there is not enough liquid that would require a drain. The drying function provides sufficient evaporative evacuation so that a drain is not necessary.

There are a few common reasons why your dryer doesn't dry clothes. Some of the most common reasons include overloading the dryer, power sources issues, clothes being too wet, a dirty dryer lint screen, clogged dryer vents, or possible part malfunctions.

Why does my Maytag dryer shut off after 5 minutes? ›

Generally, a dryer shuts off prematurely either because the moisture sensor is dirty, the motor is over heating or there is a issue with the heat sensing and control system.

When Maytag closed its doors in 2007, it was a rough transition. At the time, some 2,000 people were building washers and dryers at the old Maytag manufacturing facility.

Reliability: Maytag is known for durable construction and dependable performance. They consistently rank well in reliability surveys by organizations like J.D. Power. Focus on Essentials: Maytag appliances often prioritize core functionalities over fancy features.

Maytag Dryer High Limit Thermostat

If the thermostat is defective, it may allow the heat to stay on too long, causing the dryer to get overheated. However, this is rarely the case. Before replacing the high limit thermostat check all the more commonly defective parts.

Many Maytag dryer models do not have a dedicated reset button like other manufacturers, however, an easy way to reset your Maytag dryer, or any appliance for that matter, is to unplug it. Once you've unplugged it, let it sit for 5-10 minutes before plugging it in again and starting a dryer cycle.

The moisture sensor tracks the levels of wetness in your dryer and then communicates with the control board. If it's defective, it can signal that your clothes are dry even when they aren't, causing the machine to shut off early.